Home | About | Sitemap | Links | Contact

Cutting Solid Stock

Tips Index

• Machine all stock at one time rather than piecemeal fashion.
  
  
• Group together pieces that require similar cuts.
  
  
• Make extra pieces for test cuts and error allowance.
  
  
• Use stop blocks to maximize accuracy and save time.
  
  
• Use jigs to speed up the cutting of identical parts.
  
  
• Cut all parts of similar design using the same saw setup.
  
  
• Use a ripping sled to facilitate the ripping of crooked boards.
  
  
• Rough cut boards slightly oversize (perhaps 1" in length and 1/4" in width).
  
  
• Use a bandsaw to resaw boards (safer and less waste).
  
  
• Sneak up on critical cuts to avoid costly mistakes.
  
  
• Cut tenons slightly short to allow space for glue squeeze-out.
  
  
• Measure twice, cut once !